Products Show
Li-Socl2 lithium battery
3.6V high stable voltage
High energy density(700kw/kg)
Long shelf life(Self-discharge rate less than 1% at 25℃)
Stainless steel container and end caps
The position: Home - Products - Li-SOCl2 Batteries - High temp.
ER34615S Model No:ER34615S IEC Size: D Voltage(V):3.6V Weight(g):108g Current(mAh\mA): 14000mAh Max constant current(mA):200mA Operate Temp.(℃):-20 End voltage(V):2.0V
  • Technical
  • Curve
  • Doc. Download

Features

Types

High rate

Moderate rate

Low rate

Features

Sprial construction ensures higher energy density and larger capacity, it provides excellent boot-up for pulse and continous usage, this model ending with MS, such as ER331270MS.

Double anodes have larger electrode surface than bobbin type, which  provide larger current, this model ending with MRS, such as E331270MRS.

Hermetic and cylindrical bobbin construction, lithium tube sticks to inner shell and surrounds carbon electrode with glass fiber, insert the positive current-collector pin, welding, then inject electrolyte and seal the injection hole. Such as ER25500S.

Strength

High power, low passivation(voltage delay)

Safety  and high energy density, low self-discharge rate, long operating life

Safety  and high energy density, low self-discharge rate, long operating life

Weekness

Low safety and energy density, high self-discharge rate, short operation life

None high rate applications, lower passivation (voltage delay)

Low power, high passivation (voltage delay)

Advantages

Improved design for safety: 1 CN separator raise Isolation strength for three times; 2 Current collecting eliminates short circuit caused by partial heat in active area; 3 internal and external current limiting fuse. Excellent capacity uniformity with range less than 8%of the average.

Improved design for safety: 1 CN separator raise Isolation strength for three times; 2 Current collecting eliminates short circuit caused by partial heat in active area; 3 internal and external current limiting fuse. Excellent capacity uniformity with range less than 5%of the average.

Cells in bobbin configuration have small electrode surface, thus they are commonly used for low rate applications. All batteries moels ending with S are classified into this type, such as ER25500S.

 

Specification

1,  Size:D;

2,  Dimension:  Φ33.5mm*61.5mm;

3,  Weight: 108g;

4,  Capacity: 14000mAh;

 (at 50mA,+150℃,2.0V cut  off)

5,  Open circuit voltage: 3.6V

6,  Max continuous current: 200mA

(at 150℃ 2.0V cut  off, up to 100% of nominal capacity)

7,  Max pulse current:300mA;

(300mA/0.1s pulse, drained every 2 minutes at 150℃ from 50mA mid-charged cells with 20μA base current, yield voltage readings above 2.7V, the readings may vary according to the pulse characteristics, the temperature, and the cells previous history.)

8,   Operating temperature: -20℃ ~ +150℃;

 

Applicantion

1,  Utility metering;

2,  Alarm and security devices;

3,  Memory back-up power;

4,  Professional electronics;

5,  Automotive electronics;

6,  Real-time clock;

7,   Tracking system.

 

Storange condition: clean, cool (preferably below +20℃, not exceeding +30℃), dry and ventilated.

Warning: Do not recharge, short circuit, crush, disassemble, heat above +100℃, incinerate,or expose contents to water. Dispose of used batteries properly in case of explosion, burn and leakage.

  • Tel: 86 27 84452919 / 84458099
  • Fax: 86 27 84453116
  • Address:Rd.5, Sitai Industrial Park, Yongfeng Avenue, Hanyang District, Wuhan City, China
  • Email: overseas@fansobattery.com
Wuhan Fanso Technology Co.,Ltd 2010-2016 By:Hicua